United States Department of Agriculture
Natural Resources Conservation Service		 National Employee Development Center Go to Accessibility Information
Skip to Page Content





Hydrology Training Series Module 151 EFM2 Microcomputer Program (NRCS-NEDC-000066)

Overview

This module presents information NRCS personnel need to know to effectively apply the EFM2 Microcomputer program to estimate runoff volume and peak flows for small rural watersheds. included are instructions, activities and tests to measure learning.

Objectives

Upon completion of this module, participants will be able to use the Engineering Field Manual, Chapter 2 (EFM2) computer program to obtain runoff volume and peak inflows. In order to accomplish this, they will:

  • load and read the README.1ST file to define the executable program fines
  • start the EFM2 System
  • enter data into the program
  • develop peak discharge values and runoff volumes

Prerequisites

None

Duration

Participant should take as long as necessary to complete the module. Training time for this module is approximately two hours.

Target Audience

This module is intended for field office employees who have not previously used the EFM2 or similar computer program.

NEDC Contact

Tony Lovell

Technical Coordinator

Quan Quan

Enrollment

Enrollment instructions are provided below.  Be sure to select the appropriate link to ensure successful enrollment. 

USDA Employees

Proceed to the Aglearn to login using your USDA eAuthentication ID and password.  This is the same as your WebTCAS ID and password.
Select Catalog, Select Natural Resources Conservation Service under Subject Area Menu, Choose the course name by select the button Launch content or Add to Learning Plan to register and complete the course.

District Employees with Aglearn account

Proceed to the Aglearn to login using your USDA eAuthentication ID and password. This is the same logon ID and password used for the TechReg TSP application or profile.
Select Catalog, Select Natural Resources Conservation Service under Subject Area Menu, Choose the course name by select the button Launch content or Add to Learning Plan to register and complete the course.

If you do not have an account.  Specific instructions on securing a USDA user account and password are located at getting started.  For further assistance contact the USDA state office in your state for assistance in obtaining an eAuthentication ID and password and AgLearn account.

Technical Service Providers

Proceed to the Aglearn to login using your USDA eAuthentication ID and password. This is the same logon ID and password used for the TechReg TSP application or profile.
Select Catalog, Select Natural Resources Conservation Service under Subject Area Menu, Choose the course name by select the button Launch content or Add to Learning Plan to register and complete the course.

If you are anticipating becoming a Technical Service Provider please review the entire process at TechReg.  Please familiarize yourself with this process if you have not already done so.  Specific instructions on securing a USDA user account and password are located at getting started.

Other USDA Customers

For those not in the above categories contact the USDA state office in your state for assistance in obtaining an eAuthentication ID and password and AgLearn account.
To obtain this contact information for your state you can go to the Aglearn website click on contact us. Scroll down to NRCS and click on the link that says state contacts.

< Back to Hydrology Series